Plant planning, machine and mould selection, foil, lubrication, maintenance and defect guides for aluminum foil container lines, from the people who build and commission them.
Guides grouped by the job in front of you, most-read first.
11 guides
Start a container plant: setup checklist, project report, plant and unit cost, foil consumption, layout and capacity.
12 guides
Automatic or semi-automatic, C-frame or H-frame, foil or CPET, and which mold for your containers.
6 guides
Machine price, suppliers by country, certifications, build time and the factory acceptance test.
7 guides
Alloy and temper, lacquered or plain foil, thickness standards and food-grade certification.
5 guides
Stamping oils and lubricants, hydraulic oil viscosity and oil levels on the press.
7 guides
Mold maintenance, operator training, scrap handling and cleaning after stamping.
4 guides
Wrinkles, pinholes, burrs and mold problems: causes, checks and prevention.
5 guides
How foil containers are made, what a container machine is built from, and how forming works.
The machines and moulds MTED builds, with the guides that go with them.
C-Frame
Open-back C-frame presses for high-speed production of standard containers.
H-Frame
Closed gantry presses for deep-draw containers and heavy-tonnage work.
Tooling
Smooth wall and wrinkle wall moulds, single to multi-cavity, fitted to your drawing and press.
Applications
Lines for take-out pans, cake, loaf and pie pans, foil cups, coffee capsules and more.